Toyota Hilux GL Double Cabin MY17 B6 Armored

  • IMG_2476
  • IMG_2476
  • IMG_2476
  • IMG_2476
Toyota Hilux GL Double Cabin MY17 B6 Armored Toyota Hilux GL Double Cabin MY17 B6 Armored Toyota Hilux GL Double Cabin MY17 B6 Armored Toyota Hilux GL Double Cabin MY17 B6 Armored

Model Description: 17YM Hilux DC 2.7L Petrol GL 4×4 B6 Armored

Share this
  • Engine & Overview
  • Interior Features & Safety
  • Exterior Features
  • Armoring Specification

Engine :

  • 2.7L, 4 Cylinder, 16 Valve, DOHC, VVT-I
  • Output 164/5200 Hp/RPM
  • Torque 24.9/4000 Kg-m/RPM
  • Fuel Tank Capacity – 80 L

 

Transmission :

  • 5-Speed – Manual

 

Dimensions :

  • Length: 5335 mm
  • Width: 1815 mm
  • Height: 1815 mm
  • Wheel Base: 3090 mm

 

Suspension & Brake System :

  • Front/Rear double wishbone with stabilizer and A.D.D. / Rigid type and leaf spring with limited slip
  • Front/Rear Ventilated disc / Drum LTS with super LSPV

Interior Features & Safety :

  • Air Conditioner Manual
  • Fabric Seats
  • Keyless Entry
  • Rubber Floor Mats
  • Power Windows
  • Front Seats 40/60 For 3 People
  • Center Locking
  • Steering Column Tilt Manual
  • Audio Am/FM/cd/aux/USB/Bluetooth
  • Number Of Speakers 4
  • Steering Wheel Control For Audio/telephone
  • Antilock Brake System (Abs)
  • Tire Inflation Pressure Warning
  • Vehicle Stability Control
  • Emergency Brake Signal
  • Hill Assist Control
  • Dual Airbag Knee Airbag Driver Only
  • Traction Control

Exterior Features :

  • Body Stripes
  • Halogen Headlamp
  • Chrome Colored Door Handles
  • Mud Guards Front Rear
  • Chrome Colored Rear View Mirror Powered
  • Fog Lamps Rear Only
  • Front Bumper Body-Colored
  • Rear Differential Lock
  • 17 Steel Wheels
  • Rear Green Glass Slide

Ballistic Specifications: B6 level is armored using materials, both opaque and transparent, that meet or exceed the requirements of the European CEN 1522/23 and CEN 1063 standards to the level FB6 for opaque areas and BR6 for transparent areas.

 

Armouring: All four sides of the passenger compartment and the roof of the vehicle are protected using high-quality armor steel
and glass defeating 7.62x51mm M80 Nato Ball ammunition (U.S. NIJ level III, CEN level FB6/BR6) and 5.56×45 SS109 ammunition (CEN level FB5/BR5 and FB6/BR6) at 0° incidence (90° to the surface) and 10m range according to CEN1063 and CEN1522.

 

Opaque Areas: All opaque areas including the roof are protected against the following and all lesser weapons/ ammunition at 90° impact angle in accordance with the above specifications.

  • Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov
  • Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt
  • Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle

 

Transparent Areas: All transparent areas are multi-layer and polycarbonate coated to protect against the following and all lesser weapons/ ammunition at 90° impact angle in accordance with the above specifications.

  • Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov
  • Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt
  • Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle

 

Floor: The floor of the vehicle is designed to defeat the following hand grenades

  • Two DM 51 (German Norm) detonated simultaneously

In addition, the floor also offers protection against anti-personnel mines.

 

Armouring design:

  • The armoring is integrated inside the vehicle’s cab and forms a complete self-supporting structure so as to avoid excessive stress on the vehicle’s original structure.
  • The interior armor-frame provides overlap for the large-surface armor components such as the door armor-plates and the windows.
  • Hinge mounting points are reinforced both in the pillars and in the doors in a way that the armoring of the door is supported by the armoring of the pillar.
  • Heavy-duty hinges with in-built door-stop.
  • Fuel-tank(s) protected with steel armor-plates.
  • The battery and control module of the engine are protected 6.5mm high-quality armor steel.

 

Test Reports/ Product Liability:

All materials used in the production of the cabin were successfully tested against projectiles and explosives by independent laboratories. Test reports can be presented upon request or during a factory visit. The armoring of the vehicle provides protection against a wide range of projectiles and explosives. However, complete protection is not possible for reasons of design and modern military weapon technology.

 

Additional equipment included:

  • ECM and battery protection
  • Fuel-tank protection
  • Upgraded suspension to cope with the additional weight due to armoring
  • Run-flat systems on all 5 wheels

 

Further optional equipment: Further optional equipment available at extra costs, such as

  • Operable front door windows
  • Ballistic radiator protection
  • Full engine sides protection
  • Brake upgrade – stage 2 (slotted discs and braided hoses + HD calipers and pads)
  • Brake upgrade – stage 3 (big discs, 6-piston calipers front, 4-piston calipers rear and pads)
  • Suspension upgrade – stage 2 (HD antiroll bars)
  • Suspension upgrade – stage 3 (high-performance springs and dampers for high-speed driving)
  • Heavy Duty 18” alloy rims with run-flats
  • Gun-ports
  • 2-way intercom
  • Police siren and Public-Address system
  • Front and rear strobe-lights integrated with OEM light lenses
  • Bull-bar
  • Communications equipment (VHF, UHF, satellite…)
  • Electronic Counter Measure Equipment (RF Jammer)
  • Video recording/surveillance equipment
  • Higher ballistic protection level
  • Additional blast protection

Note : Images are for illustrative purpose and may appear different to the actual vehicle.
Specification may change without prior notice.

Request Quotation Now









Let's Build
Your Vehicles